We are the China professional skew rolling mill(skew rolling machine,hot rolled steel ball production line)manufacturer.We can supply whole designs of hot rolled steel ball production line, including the factory layout design, water cooler, electric design, machine sets, etc. Hot rolled steel ball is a latest ball rolling technology, it is the technical breakthrough of ball milling manufacturing process, and it is replacement of casting steel ball gradually. http;//www.skewrollingmill.com
2015年6月11日星期四
The Processes of Matching the Proper Grinding Balls for Ball Grinder
The Processes of Matching the Proper Grinding Balls for Ball Grinder
2015年6月9日星期二
The Processes of Matching the Proper Grinding Balls for Ball Grinder
The Processes of Matching the Proper Grinding Balls for Ball Grinder
Suchuang Machinery Equipment Co., Ltd(http://www.skewrollingmill.com)
Email: info@skewrollingmill.com
The grinding ball is a material grinding media of ball mill and coal mill. Its' function is as an important component of ball mill under grinding and cutting effect brought by the friction between grinding balls and materials.Therefore,let's talk about the processes of matching the proper grinding balls for ball grinder.
1. With effective surface area of steel balls to measure the rationality of the steel ball ratio. A warehouse in effective surface area of steel balls should achieve every ton of steel balls 9.5-10.5 m2. For with the roller press of closed circuit ball mill, this value can be adjusted for 12 m2/t, and the liner plate is continuous ascension type. The balls in the specific surface area should be 35-38 m2/t, belt roller pressure unit for 38-40 m2/t. The ratio of specific various balls diameter still according to the maximum stacking density calculation.
2.Generally, the load rate is 25% -35% in the filling space of abrasion resistance steel balls, the lower loading rate of steel ball, the less of power consumption, and the productivity is getting low. Therefore, the primary prerequisite of the total count of adding grinding media is that the ball weight and the weight of the material in the mills is less than the allowable value and close to the ball mill motor power.
3. Conforming to the loading principle on grinding balls in the main warehouse. The size of feeding clinker particle in the first warehouse is not more than 30 mm, so it's main function is broken, and the diameter of Steel balls loaded should be in 50 between 90 mm. When into the second warehouse of ball grinding mill, the clinker are less than 2-3 mm, so it is the function of fine grinding, steel balls' range in this warehouse should be 15-50 mm.
4. Computing unit ball production to verify the rationality of the match ball.
5. Determining the maximum diameter of the grinding media.
Suchuang Machinery Equipment Co., Ltd(http://www.skewrollingmill.com) is a professional skew rolling mill manufacturer in China, the diameter of our steel balls span from 20mm-150mm. Priorities of our steel balls: High hardness, good wear resistance, breakage rate lower than 0.5%, no deformation all through.
Suchuang Machinery Equipment Co., Ltd(http://www.skewrollingmill.com)
Email: info@skewrollingmill.com
The grinding ball is a material grinding media of ball mill and coal mill. Its' function is as an important component of ball mill under grinding and cutting effect brought by the friction between grinding balls and materials.Therefore,let's talk about the processes of matching the proper grinding balls for ball grinder.
1. With effective surface area of steel balls to measure the rationality of the steel ball ratio. A warehouse in effective surface area of steel balls should achieve every ton of steel balls 9.5-10.5 m2. For with the roller press of closed circuit ball mill, this value can be adjusted for 12 m2/t, and the liner plate is continuous ascension type. The balls in the specific surface area should be 35-38 m2/t, belt roller pressure unit for 38-40 m2/t. The ratio of specific various balls diameter still according to the maximum stacking density calculation.
2.Generally, the load rate is 25% -35% in the filling space of abrasion resistance steel balls, the lower loading rate of steel ball, the less of power consumption, and the productivity is getting low. Therefore, the primary prerequisite of the total count of adding grinding media is that the ball weight and the weight of the material in the mills is less than the allowable value and close to the ball mill motor power.
3. Conforming to the loading principle on grinding balls in the main warehouse. The size of feeding clinker particle in the first warehouse is not more than 30 mm, so it's main function is broken, and the diameter of Steel balls loaded should be in 50 between 90 mm. When into the second warehouse of ball grinding mill, the clinker are less than 2-3 mm, so it is the function of fine grinding, steel balls' range in this warehouse should be 15-50 mm.
4. Computing unit ball production to verify the rationality of the match ball.
5. Determining the maximum diameter of the grinding media.
Suchuang Machinery Equipment Co., Ltd(http://www.skewrollingmill.com) is a professional skew rolling mill manufacturer in China, the diameter of our steel balls span from 20mm-150mm. Priorities of our steel balls: High hardness, good wear resistance, breakage rate lower than 0.5%, no deformation all through.
Drawbacks of the Casting ball
Drawbacks of the Casting ball
Suchuang Machinery Equipment Co., Ltd(http://www.skewrollingmill.com)
Email: info@skewrollingmill.com skewrollingmill@yeah.net
Drawbacks of the Casting ball process £º
1.Casting ball is made of by pig iron, adding amount of (13-28%) Chrome could be required the steel ball for ball mill.
2.Casting ball loose organization, coarse grains, poor ware resistance and impact thoughness(3-7J/cm3), breakage rare exceed 3%
3.High energy consumption, heavily polluted and labor intensity high, low productivity
4.the cost of raw material and wages are high, especially below dia 50mm
Suchuang Machinery Equipment Co., Ltd(http://www.skewrollingmill.com)
Email: info@skewrollingmill.com skewrollingmill@yeah.net
Drawbacks of the Casting ball process £º
1.Casting ball is made of by pig iron, adding amount of (13-28%) Chrome could be required the steel ball for ball mill.
2.Casting ball loose organization, coarse grains, poor ware resistance and impact thoughness(3-7J/cm3), breakage rare exceed 3%
3.High energy consumption, heavily polluted and labor intensity high, low productivity
4.the cost of raw material and wages are high, especially below dia 50mm
2015年6月5日星期五
Hot rolled steel ball technology
Hot rolled steel ball technology:Ball diameter range Φ20-Φ150mm. Rolling ball milling is used in a variety of chemical composition billets rolled round bars, its diameter is equal to the nominal diameter of the ball. The main production process of hot rolling steel ball as follows:1, After the round bar examination, by length cut into steel ball billet.2, The steel billet heated to a suitable temperature in a continuous heating furnace before rolling.3, After the red-hot state steel billet feeding into the ball mill, forward rotation in between special spiral grooved rollers, and is continuously rolled into a ball. Each steel skew ball mill can roll 60-360 steel ball per minute.4, The red hot ball rolled into special designed online heating treatment furnace for quenching – tempering heat treatment, so can get high uniform hardness ball.5, After inspection steel balls sent to the finished goods warehouse, after packaging then sent to customers.
2015年6月4日星期四
Main processes of hot rolling grinding balls as follows
Main processes of hot rolling grinding balls as follows
Suchuang Machinery Equipment Co., Ltd(http://www.skewrollingmill.com)
Email: info@skewrollingmill.com
Main processes of hot rolling grinding balls as follows:
1.the raw material of rolling ball is round bar with all kind of chemicals; the diameter is same as the nominal diameter of the steel ball.
2.round bar is heated in the modern continuous furnace.
3.the heating bar sent to the rolling mill, and go ahead between two screw rolls. Then steel ball will be rolled on the two rolls. One rolling mill can roll 60-360 pcs/min
4. heat treatment---The process of grinding ball heat treatment to the required hardness takes place in the modern furnace, in junction with large-capacity quenching vessel.
5. finished steel ball with precise dimensions, good geometric shape, good wear resistance and mechanical properties.
Suchuang Machinery Equipment Co., Ltd(http://www.skewrollingmill.com)
Email: info@skewrollingmill.com
Main processes of hot rolling grinding balls as follows:
1.the raw material of rolling ball is round bar with all kind of chemicals; the diameter is same as the nominal diameter of the steel ball.
2.round bar is heated in the modern continuous furnace.
3.the heating bar sent to the rolling mill, and go ahead between two screw rolls. Then steel ball will be rolled on the two rolls. One rolling mill can roll 60-360 pcs/min
4. heat treatment---The process of grinding ball heat treatment to the required hardness takes place in the modern furnace, in junction with large-capacity quenching vessel.
5. finished steel ball with precise dimensions, good geometric shape, good wear resistance and mechanical properties.
2015年6月3日星期三
Four Principles of Mill and Ball Ratio
Four Principles of Mill and Ball Ratio
Suchuang Machinery Equipment Co., Ltd(http://www.skewrollingmill.com)
Email: info@skewrollingmill.com
The Collocation between steel ball and ball mill exist certain principles. So, what are these principles?
1, According to the power of the main motor of ball mill ball allowed determining the amount. Fill space load rate is in commonly 25% - 35%, ball load rate is low and the power consumption is also reduced, but the productivity is low. Therefore, prerequisite of verify the total weight is to add the steel ball and material in the mill and the weight is less than allowable value close to the ball mill and motor power.
2, Determine the maximum steel ball diameter.
3, Measure the ball ratio and steel ball surface area to reach the rationality. The warehouse steel ball surface area of steel per ton reach 9.5 - 10.5m2, for closed-circuit ball milling with roller press, this value can be adjusted to 12 - 14m2/t steel ball. The liner is a continuous improvement. The ball into the two bins in the specific surface area is 35 - 38m2/t steel ball; with roller press is 38 - 40m2/t steel ball. The entire specific ball diameter ratio still should be calculated in terms of the maximum packing density.
4, Match with the principle of ball main functions of each bin the ball, and combined with the liner type. A barn feeding clinker particles up to 30mm, and all its main role is to broken. So, the diameter of the steel ball load should be between 50 to 90mm. Clinker into the ball mill chamber second is less than 2-3mm, Dry Ball Mill Introductionso it is the role of fine grinding, which the storehouse ball range should be 15 - 50mm. Because the fine grinding is grinding and with a single size ball (20 - 25mm), which lined a single waveform lining board can achieve the highest efficiency. If the two cabins can still choose a certain range of steel ball diameter, it can adopt grading lining plate and let the ball near the partition board, small ball in the discharge end.
Suchuang Machinery Equipment Co., Ltd(http://www.skewrollingmill.com)
Email: info@skewrollingmill.com
The Collocation between steel ball and ball mill exist certain principles. So, what are these principles?
1, According to the power of the main motor of ball mill ball allowed determining the amount. Fill space load rate is in commonly 25% - 35%, ball load rate is low and the power consumption is also reduced, but the productivity is low. Therefore, prerequisite of verify the total weight is to add the steel ball and material in the mill and the weight is less than allowable value close to the ball mill and motor power.
2, Determine the maximum steel ball diameter.
3, Measure the ball ratio and steel ball surface area to reach the rationality. The warehouse steel ball surface area of steel per ton reach 9.5 - 10.5m2, for closed-circuit ball milling with roller press, this value can be adjusted to 12 - 14m2/t steel ball. The liner is a continuous improvement. The ball into the two bins in the specific surface area is 35 - 38m2/t steel ball; with roller press is 38 - 40m2/t steel ball. The entire specific ball diameter ratio still should be calculated in terms of the maximum packing density.
4, Match with the principle of ball main functions of each bin the ball, and combined with the liner type. A barn feeding clinker particles up to 30mm, and all its main role is to broken. So, the diameter of the steel ball load should be between 50 to 90mm. Clinker into the ball mill chamber second is less than 2-3mm, Dry Ball Mill Introductionso it is the role of fine grinding, which the storehouse ball range should be 15 - 50mm. Because the fine grinding is grinding and with a single size ball (20 - 25mm), which lined a single waveform lining board can achieve the highest efficiency. If the two cabins can still choose a certain range of steel ball diameter, it can adopt grading lining plate and let the ball near the partition board, small ball in the discharge end.
2015年6月1日星期一
Main processes of hot rolling grinding balls as follows
Main processes of hot rolling grinding balls as follows
Suchuang Machinery Equipment Co., Ltd(http://www.skewrollingmill.com)
Email: info@skewrollingmill.com
Main processes of hot rolling grinding balls as follows:
1.the raw material of rolling ball is round bar with all kind of chemicals; the diameter is same as the nominal diameter of the steel ball.
2.round bar is heated in the modern continuous furnace.
3.the heating bar sent to the rolling mill, and go ahead between two screw rolls. Then steel ball will be rolled on the two rolls. One rolling mill can roll 60-360 pcs/min
4. heat treatment---The process of grinding ball heat treatment to the required hardness takes place in the modern furnace, in junction with large-capacity quenching vessel.
5. finished steel ball with precise dimensions, good geometric shape, good wear resistance and mechanical properties.
Suchuang Machinery Equipment Co., Ltd(http://www.skewrollingmill.com)
Email: info@skewrollingmill.com
Main processes of hot rolling grinding balls as follows:
1.the raw material of rolling ball is round bar with all kind of chemicals; the diameter is same as the nominal diameter of the steel ball.
2.round bar is heated in the modern continuous furnace.
3.the heating bar sent to the rolling mill, and go ahead between two screw rolls. Then steel ball will be rolled on the two rolls. One rolling mill can roll 60-360 pcs/min
4. heat treatment---The process of grinding ball heat treatment to the required hardness takes place in the modern furnace, in junction with large-capacity quenching vessel.
5. finished steel ball with precise dimensions, good geometric shape, good wear resistance and mechanical properties.
订阅:
博文 (Atom)