2015年5月18日星期一

How to make stainless steel ball wear-resisting

How to make stainless steel ball wear-resisting

Suchuang Machinery Equipment Co., Ltd(http://www.skewrollingmill.com)
Email: info@skewrollingmill.com

Ball can be divided into stainless steel ball, bearing steel balls, carbon steel balls three categories. In addition to stainless steel ball has some rust function, the other two materials of the finished ball will need anti-rust oil protection against rust. Ball bearings used in the bearings, the anti-rust oil is essential for protecting agents and lubricants.
In order to improve the quality of the bearing, energy loss and improve the life of stainless steel ball and reducing the harm to human health, the use of anti-rust oil on its content has some elegant. Rust oil dehydration for existing applications, play a positive role.

Rust oil dehydration is made of dehydrating agents, rust inhibitors, and in light petroleum distillate allocation . After ball bears water-based cleaning fluid through the water-washing, it leaves a water film on surface of the ball . The rust oil dehydration dehydrating agent and the interfacial tension of the metal surface than tap water or water-based cleaning agent solution and the metal surface tension, rust oil dehydration, through its contact with the metal surface of the water film and the metal ball blasting further penetration surface. Attached to the surface of the ball to form a thinner layer of humor, which can play a protective role of ball surface and rust. After the ball bearing assembly used in the process, more wear-resistant and has a long-term anti-rust effect.

2015年5月15日星期五

Specific advantages of liner wear is reflected in what areas?

Specific advantages of liner wear is reflected in what areas?

Suchuang Machinery Equipment Co., Ltd(http://www.skewrollingmill.com)
Email: info@skewrollingmill.com

1, the high wear resistance chemical composition of the alloy layer of the carbon content is 4-5%, chromium content of up to 25 ~ 30%, the microstructure of Cr7C3 carbide volume fraction of 50% or more, macro-hardness of HRC56 ~ 62 , hardness of chromium carbide HV1400 ~ 1800, higher than the hardness of quartz sand HV800 ~ 1200. Since carbide into distribution in the direction perpendicular to wear, even with the same cast alloy composition and hardness compared to wear more than doubled working principle of ball mill liner. With several typical Abrasiveness comparison is as follows:
(1) and the low-carbon steel; 20 ~ 25:
(2) with a high manganese steel; 5 to 10:
(3) with the tool steel; 5 ~ 10:
(4) with high chromium cast iron; 1.5 to 2.5:
2, good impact resistance: resistant composite steel bottom are low-carbon steel or low alloy. Ductile material such as stainless steel, reflects the superiority of the bimetal, wear-resistant layer of wear resistant abrasive media, the substrate exposed to the medium load, it is good impact resistance. Material handling system can withstand high drop hopper to withstand impact and abrasion.
3, good heat resistance: Wear layer is recommended to use at ≤ 600 ℃ conditions, if the alloy layer was added vanadium, molybdenum and alloys can withstand high temperature of ≤ 800℃. Recommended temperature as follows: Ordinary carbon steel substrate is not recommended to use more than 380 ℃ working conditions; low-alloy heat-resistant steel (15CrMo, 12Cr1MoV, etc.) is not higher than 540 ℃ substrate recommended operating conditions used; resistant stainless steel substrate is not higher than recommended 800 ℃ conditions used.
4, good corrosion resistance, wear-resistant composite steel alloy layer contains a high percentage of chromium, it has some rust and corrosion resistance. Coal drop tube and funnel for other occasions can be done to prevent caking coal.
5, applicability resistant composite steel specifications, has many varieties, has become a commodity serialization. Wear-resistant alloy layer has a thickness 3 ~ 20mm. The thickness of the thinnest composite plate is 6mm, the thickness is not limited. Currently, the standard wear-resistant steel sheet provides 1200 or 1450 × 2000mm, also according to user needs, according to the paper size custom processing. Resistant composite plate are divided into common type, impact resistance and high temperature type, ordered high temperature resistant and impact-resistant composite plate to explain.
6, facilitate processing performance can be cut resistant composite plate, leveling, punching, bending and curling, characteristics of forging production it can be made flat, arc plate, cone and plate, cylinder. Composite panels can cut a good welding into a variety of engineering structures or components. Composite panels can also be pressed into heating touch with complex shapes. Resistant composite plate can be fixed with bolts or welding equipment, replacement and easy maintenance.
7, a high price-performance ratio resistant composite plate though manufacturing costs increase, but life improve several times, making the maintenance costs and downtime greatly reduced, its price performance is higher than common materials height of about 2 to 4 times. Greater the amount of material handling, equipment, factories and mines more serious wear and tear, wear-resistant composite plate using the more obvious economic effect.

2015年5月11日星期一

How to make wear-resisting stainless steel ball

How to make wear-resisting stainless steel ball

Suchuang Machinery Equipment Co., Ltd(http://www.skewrollingmill.com)
Email: info@skewrollingmill.com

Ball can be divided into stainless steel ball, bearing steel balls, carbon steel balls three categories. In addition to stainless steel ball has some rust function, the other two materials of the finished ball will need anti-rust oil protection against rust. Ball bearings used in the bearings, the anti-rust oil is essential for protecting agents and lubricants.
In order to improve the quality of the bearing, energy loss and improve the life of stainless steel ball and reducing the harm to human health, the use of anti-rust oil on its content has some elegant. Rust oil dehydration for existing applications, play a positive role.

Rust oil dehydration is made of dehydrating agents, rust inhibitors, and in light petroleum distillate allocation . After ball bears water-based cleaning fluid through the water-washing, it leaves a water film on surface of the ball . The rust oil dehydration dehydrating agent and the interfacial tension of the metal surface than tap water or water-based cleaning agent solution and the metal surface tension, rust oil dehydration, through its contact with the metal surface of the water film and the metal ball blasting further penetration surface. Attached to the surface of the ball to form a thinner layer of humor, which can play a protective role of ball surface and rust. After the ball bearing assembly used in the process, more wear-resistant and has a long-term anti-rust effect.

2015年5月8日星期五

The use of the grinding media steel ball correctly

The use of the grinding media steel ball correctly

Suchuang Machinery Equipment Co., Ltd(http://www.skewrollingmill.com)
Email: info@skewrollingmill.com

Small steel ball to add just the first time and with the ball. Because, when the normal operation of the ball mill and ore, steel and reasonable friction between ball mill lining board, will make abrasion increases, in the small ball mill, ball mill for ball. So usually under normal circumstances, do not need to add ball. Add ball is no monomer dissociation in the useful mineral particle size when the fineness of grinding machine can not meet the flotation demand, can add a little ball. Wear of steel ball mill in the process of operation continuously, in order to keep the ball charge filling ratio and the ball of the reasonable proportion, maintain the stability of ball mill operation, must be reasonable for the ball, DiChang wear.
Steel ball add weight, it is according to the quality of the steel ball, steel ball quality, determines the ore tons of adding consumption, had better use the new wear-resistant steel ball, such as using the train wheels with special processing of forging steel ball on the wear-resisting.
New installation of the ball mill has a run-in period, in the running-in process, the amount of steel ball for the first time to add, 80% of the maximum loading ball of ball mill, the proportion of steel ball added can be according to the size of steel ball (Φ 120 ㎜, 100 ㎜ Φ, Φ 80 ㎜, 60 ㎜ Φ, Φ 40 ㎜) size added. Different models of its ball mill ball quantity is different. For example MQG1500 x 3000 largest ball mill ball quantity 9.5-10 tons. For the first time to add steel ball ball (120 ㎜ and 100 ㎜) accounted for 30%, 40%, Reasons of the ball aging the ball 80 ㎜ accounts for 40%, 30%, small ball (60 and 40 ㎜) accounted for 30%.
Why in the process of ball mill in ball mill ball only add 80%,because after installation of ball mill, ball mill need mesh size, capacity are to be gradually increased, with ball mill normal running in two or three days in a row, pick up to check the size of the gear meshing, everything is all right, open the add the remaining 20% steel ball mill manhole covers the second.
High chrome steel ball is mainly used in grinding machine mining condition is relatively poor metal processing industry, mines and thermal power energy.
Low chrome steel balls are widely used in cement industry, chemical industry, power plants, and other fields
Golden ball mill with chromium wear-resistant alloy cast steel balls of ball mill features: high hardness, low wear, Quality index of high chromium steel good toughness and do not break round, broken. Widely used in cement, chemical fertilizer, silicate products, new building material, refractory material, black and non-ferrous metal ore dressing and glass ceramics production industry, etc. In use process, the ball will further improve the surface hardness, wear resistance, and can improve the grinding machine production capacity, improve the cement specific surface area and recovery. Proved by many users, the factory of the wear resistant chromium alloy cast steel ball could keep higher grinding efficiency for a long time, the relative stability of the ball diameter and size distribution, is advantageous to the production of ball mill, stability and improve quality, reduce the ball, a clearance.
Steel ball which are made by skew rolling mill in cement mill during normal operation, every tons of cement production: consume 70 grams or less, low chrome steel ball single storehouse broken rate of 1% or less; High consumption of 30 grams or less chrome steel ball single storehouse, broken rate of 1 ‰ or less. Low chromium consume 80 grams or less forging single storehouse, broken rate of 1.5% or less; High chromium forging single storehouse consumption of 40 grams or less, breakage or less 5 ‰. In coal-fired power plant of the normal operation of coal mill, grinding coal per ton: consume 150 grams or less, low chrome steel ball single storehouse broken rate of 1% or less; High chrome steel balls single warehouse cost 60 grams, or less breakage rate of 1 ‰ or less. In metallurgy, mining,characteristics of forging production chemical and other industrial and mining enterprises according to the buyer conditions to determine the steel ball attrition and breakage rate.

2015年5月6日星期三

Three factors of Choosing forging grinding balls

Three factors of Choosing forging grinding balls


Suchuang Machinery Equipment Co., Ltd(http://www.skewrollingmill.com)
Email: info@skewrollingmill.com

In the field of powder engineering industry, for forging steel ball are familiar with this new type of wear-resistant materials.It not only has the good performance-to-price ratio, and smooth surface , compact structure, high impact toughness, good wear-resisting performance.In addition, because it has the character of steel, steel ball also has a uniform hardness, no breakage, abrasive resistance, high impact value, using integrated high efficiency etc.
As the forging steel ball is used more and more widely, so how to choose the appropriate forging steel ball?What kind of factory is appropriate?There are three main factors, respectively quality, price and after-sales, the following specification about them.
Quality, it is one of the most important distinguishing factor of choosing the forging steel ball .The quality of the forging steel ball is required,it will be eliminated if can not meet the corresponding requirement , which from another aspect reminds manufacturers should pay attention to the quality of the product.
Price, the price is not only important for forging steel ball factory, the purchaser.For purchasing ,lower price, more better, but from the forging process of steel ball, it is impossible.Thus the price of forging steel ball are questionable.
Purchaser is more worried about after-sales, because forging steel ball is high consumption product, high quality and perfect supporting services can ensure good use of steel ball.
If we can do, it has great hope to win orders.

2015年5月5日星期二

Hot-rolled steel ball advantage

Hot-rolled steel ball advantage by skew rolling mill(machine):
http://www.skewrollingmill.com info@skewrollingmill.com
Our Hot rolled steel ball with precise dimensions, round geometry, high hardness and good mechanical properties and with high wear resistance, no distortion, no cracking of excellent quality.
Its characteristics as following:
1, High overall hardness: the surface hardness can reach 55-65HRC, volume hardness can reach 50-62HRC, and the hardness gradient distribution even.
2, High impact toughness: toughness greater than 12J/cm2.
3, Low broken rate: anti-peel broken and anti-crushing performance is more than 10 times the normal casting and forging steel balls, falling ball impact more than times 20,000, while the actual breakage rate less than 1%, close to no broken. Hot rolling steel ball adopted in all kinds of ball ferrous and nonferrous metals processing plant mines, power plants, cement plants, refractory plants and other industries.

Hot rolled steel ball technology

Hot rolled steel ball technology:
http://www.skewrollingmill.com info@skewrollingmill.com
Ball diameter range Φ20-Φ150mm. Rolling ball milling is used in a variety of chemical composition billets rolled round bars, its diameter is equal to the nominal diameter of the ball. The main production process of hot rolling steel ball as follows:
1, After the round bar examination, by length cut into steel ball billet.
2, The steel billet heated to a suitable temperature in a continuous heating furnace before rolling.
3, After the red-hot state steel billet feeding into the ball mill, forward rotation in between special spiral grooved rollers, and is continuously rolled into a ball. Each steel skew ball mill can roll 60-360 steel ball per minute.
4, The red hot ball rolled into special designed online heating treatment furnace for quenching – tempering heat treatment, so can get high uniform hardness ball.
5, After inspection steel balls sent to the finished goods warehouse, after packaging then sent to customers.